|
|
|
Remote Central's File Area
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
Bose Audio System Configurations
| |
|
In this section: Browse our entire collection of device-specific configuration files, gathered from all of our file areas.
| Page 2 of 5
|
Bose Audio Systems - Device Configurations Displaying entries 11 through 20, of 43 available.
Bose Lifestyle 28 & 35 Audio System
Added by DJ Wood | 2002 | 2,389 views
• Operated by model RC-28T original remote control. v1.2 This file was created for use with Lifestyle 28 & 35 media centers that still use older firmware, not compatible with the newer v3.0 CCF file posted.
Designed for:
Philips Pronto TSU2000 & RU940
|
|
Bose Lifestyle 35 Audio System
Added by DJ Wood | 2003 | 2,421 views
• Operated by model RC-28T original remote control. Also for the Lifestyle 18, Lifestyle 28 and Lifestyle BUILT-INvisible system. This PCF file was created using hand-built IR Hex codes. It provides IR control of these Bose Home Theater Systems, when the "Receive IR" mode is turned on. This file contains both ZONE 1 and Zone 2 IR control codes in case you need to control the Multi-room Zone using an IR repeater system. The "Default" file included contains the Lifestyle devices merged into a Pronto TSU-3000 default file. This will allow for quick integration into a standard configuration.
Designed for:
Philips Pronto NG TSU3000 & RU950
|
|
Bose Lifestyle 48, 38, 28 & 18 Audio System
Added by DJ Wood | 2008 | 3,191 views
• Operated by model RC-38T, RC-18T, PMCII, RC-18s, RC-48s original remote control. This file contains the full set of IR commands required to support Bose Lifestyle 38 & 48 media centers w/ console software version CON 02.03.01 or later. In addition to all of the commands issued by the system's original RF based (RC-38T) this file contains discrete Power On, Power Off, FM Assert and AM Assert. This file also provides support for five of the Bose link room codes (B thru E and O, Audio Stream 2). These commands would normally come from the RF-based PMCII remote (RC-48S). The panels in this PCF are just code pages; a programmer will need to use their own remote design layout and should create button shortcuts to the code page panels provided. All of the buttons for each room appear on individual panels.
Designed for:
Philips Pronto NG TSU3000 & RU950
|
|
Bose Lifestyle 48, 38, 28, 18 Audio System
Added by DJ Wood | 2008 | 8,042 views
• Operated by model RC-38T, RC-18T, PMCII, RC-18s, RC-48s original remote control. This file contains the full set of IR commands required to support Bose Lifestyle 38 & 48 media centers w/ console software version CON 02.03.01 or later. In addition to all of the commands issued by the system's original RF based (RC-38T) this file contains discrete Power On, Power Off, FM Assert and AM Assert. This file also provides support for ALL 14 of the Bose link room codes (B thru 0, Audio Stream 2). Stream 1 versions of Bose link commands are not included. These commands would normally come from the RF-based PMCII remote (RC-48S). The panels in this XCF are just code pages; a programmer will need to use their own remote design layout and should create button shortcuts to the code page panels provided. All of the buttons for each room appear on individual panels.
Designed for:
Philips Pronto Professional TSU9600
|
|
Bose Lifestyle V30 & V20 Audio System
Added by DJ Wood | 2008 | 3,013 views
• Operated by model RCV1T original remote control. This file contains a complete set of IR commands required to support Bose Lifestyle V30 and V20 home theater systems w/ console software version CON 02.02.00 or later. In addition to all of the commands issued by the system's original RF based (RCV1T) this file contains discrete Power On, Power Off, FM Assert and AM Assert commands. This file does not provide support for IR control of Bose link expansion rooms as this feature is not supported at this time. The panels in this PCF are just code pages; a programmer will need to use their own remote design layout and should create button shortcuts to the code page panels provided. All of the buttons for each room appear on individual panels.
Designed for:
Philips Pronto NG TSU3000 & RU950
|
|
Bose Lifestyle 12 Audio System
Added by Don South | 2003 | 2,872 views
This file contains the IR to RF codes in order to control the Bose Lifestyle 12 system. You will have to already have an IR to RF system installed for these codes to work.
Designed for:
Philips Pronto TSU2000 & RU940
|
|
Bose Wave Radio Audio System
Added by Donald Bynum | 2002 | 2,078 views
Bose Wave Radio without CD.
Designed for:
Philips Pronto TSU2000 & RU940
|
|
Bose Lifestyle 18II Audio System
Added by Eric Johnson | 2004 | 2,379 views
New codes for this Bose system.
Designed for:
URC Home Theater Master MX-700
|
|
Bose Lifestyle 28II Audio System
Added by Eric Johnson | 2004 | 2,149 views
New codes for this Bose system.
Designed for:
URC Home Theater Master MX-700
|
|
Bose Lifestyle 38 Audio System
Added by Eric Johnson | 2004 | 2,115 views
New codes for this Bose system.
Designed for:
URC Home Theater Master MX-700
|
|
|
Share with the remote control community by uploading a file to Remote Central!
|
|
|
|