Your Universal Remote Control Center
RemoteCentral.com
URC Hard Button Control Family File Area
Previous page Next page Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 
 
In this section: A collection of system files for use with URC's text-based remotes controls. Find finished device layouts, IR codes, macros and more!

Previous Level
Page 1 of 11
System Layout Files
Displaying entries 1 through 10, of 109 available.
Nolan's MX-900
Added by aka23 | 2011 | 13,588 views
My setup is divided into the 3 areas - theater, living room, and bedroom. Each area includes 2 watch functions - one for TV and one for blu-ray. The watch functions turn on & set up components/lighting, while the corresponding listen functions go to the menus without adjusting components. There are many macros, and many buttons that have different functions depending on how long the button is held. For example, pressing "overscan" goes to the corresponding menu of the Epson projector (this should be a standard remote function rather than having to navigate through 3 layers of menus), and holding "overscan" simply opens the menu for the user to make other adjustments.

I make adjustments often, as I often have new or changing needs, so there are some remnants of old functions that are no longer used. As an example, the 3rd Blu/TV Theater pages have controls for the Sim2 projector (alternate), while the default 1st page has controls for the Epson projector (primary). Comments/questions are welcome.
Designed for:
URC Complete Control MX-900
Alan Minchew's MX-700 Setup
Added by Alan Minchew | 2003 | 10,671 views
A complete MX-700 setup with discrete codes for most devices.
Designed for:
URC Home Theater Master MX-700
Arna Perry's System Setup
Added by Arna Perry | 2003 | 10,298 views
This is a first cut at my system. I used the 2nd page of Main for my on/off switches. Please feel free to comment and suggest.
Designed for:
URC Home Theater Master MX-700
Bill Spence's MX-700 System
Added by Bill Spence | 2002 | 10,254 views
Many hard to find discrete codes. I use the mute and prev ch buttons to toggle between my receiver and DVD/TiVo. I also use push and hold macros extensively. My two DSS receivers are next to each other so I have one set for ID 1 and the other to ID 51. I am still looking for a VIDEO 7 discrete for the TV and any Yamaha DSP discretes. Thanks to Greg for doing the hex conversions!
Designed for:
URC Home Theater Master MX-700
Bill Wilson's Home Theater
Added by Bill Wilson | 2003 | 10,690 views
I have it so that I can control the DSP fuctions of my DSP-A1 and Dolby and DTS setting on each device so that I can switch between them and stereo easily. So I am sure a lot of you will need to erase buttons you don't need but I believe all the nessasary ones are there. I have discrete codes for everything except the Motorola cable box.
Designed for:
URC Home Theater Master MX-700
BNC-RCA-RG59's MX-900
Added by BNC-RCA-RG59 | 2006 | 6,205 views
I made this remote for an old couple that wanted to be able to record 25 shows a week. They used to have 5 VCR's around the house in different rooms. Now they have one Dual Tuner HD Tivo. After a week of use the only complaint was that they wanted to record two shows at the same time while watching a third (Monday night football). So I connected another HD DVR Comcast box from another room into the mix using RF and like the feature to pause live tv any time and be able to fast foward through the commercials. Still looking for the new 30sec skip for the 3 series TIVO if anyone is holding.
Designed for:
URC Complete Control MX-900
Brian Steeves' Second System
Added by Brian Steeves | 2010 | 9,726 views
A full system MXF based around the Onkyo TX-NR807 receiver.
Designed for:
URC Home Theater Master MX-700
Brian Steeves' System
Added by Brian Steeves | 2004 | 5,842 views
Here is a complete system configuration including macros and learned codes for most of the devices that are not in the HTM database.
Designed for:
URC Home Theater Master MX-700
Brian Troy's MX-700 MXF
Added by Brian Troy | 2003 | 5,698 views
This system file has been a work in progress until recently. I feel that the "POWER" page helps just in case one of your TOAD devices is out-of-sync. I also added a "GOTO" page where I stored all my switching macros.
Designed for:
URC Home Theater Master MX-700
5 Room Whole House System
Added by Byron Anderson-Lister | 2009 | 15,828 views
This complex system file allows me to control 5 rooms worth of equipment. Essentially I have 3 identical remotes that are deployed into the 3 rooms. Users select a room and can then choose to listen or watch what's available in that room.

Some rooms turn on equipment (B speakers for the kitchen or 2nd/3rd zones) from the main receiver which adds some complexity. Since I couldn't get hold of an MC-400 you can't move a remote from room to room without it wiping the variables associated with the old room. This is an acceptable compromise is my situation.

I've setup on/off menus that give the user various options with regards to what they want to turn on or off (or even reboot) and there is rudimentary help menu. When switching activities in a room (using the jump button to go back to the main activities for a room) the remote checks if devices have been left on and asks the user if they want to turn it off or not).

I thought it worth posting this as it shows some complex programming (albeit not that neat). I make extensive use of variables and press hold functionality to all me to easily add a new device.
Designed for:
URC Complete Control MX-950
Page 1 of 11

Search Remote Central's Files
Find in
Look in all areas URC Hard Button Control Family
only this section & inwards
More


Share with the remote control community
by uploading a file to Remote Central!
Hosting Services by ipHouse