The following page was printed from RemoteCentral.com:
In this section: Our database of individual device setups, complete with infrared codes, labels and macros.
| Page 3 of 4
|
Samsung Televisions - Device Configurations Displaying entries 21 through 30, of 32 available.
Samsung HLN-xx7W Television
Added by Jason Piazza | 2003 | 2,366 views
Includes discrete power and video input codes. Should also work with the HLNxx65W and HLMxx65W series of 43", 50" and 61" TVs.
Designed for:
URC Home Theater Master MX-700
|
|
Samsung LN-S4692D Television
Added by Daniel Cauchy | 2006 | 2,237 views
A complete setup for this device.
Designed for:
URC Home Theater Master MX-700
|
|
Samsung HLP-5685 Television
Added by Jeff Hayes | 2005 | 2,197 views
• Operated by model BP59-00048C original remote control. This MXD file contains ALL of the discrete codes that work for this particular model and firmware version 1031. There are duplicate codes for some functions, notably MTS and FAV. These are included for the sake of completeness. Feel free to remove them or tweak as needed. Again, this MXD file is specific to the 1031 firmware release for the HLP-5685, it may or may not work for other DLP models and firmware revisions.
Designed for:
URC Home Theater Master MX-700
|
|
Samsung HL-T5087S Television
Added by Brett Chapman | 2008 | 2,119 views
• Operated by model BP59-00125A original remote control. This is a simple configuration with learned codes.
Designed for:
URC Home Theater Master MX-700
|
|
Samsung HPN-6339 Television
Added by E. J. Feulner | 2003 | 2,081 views
The first available discrete codes for the Samsung series of HD Plasma TVs. Should also work on the 50" model. Includes discrete input and power codes.
Designed for:
URC Home Theater Master MX-700
|
|
Samsung HLP-5063W Television
Added by Christopher Darsch | 2005 | 2,071 views
• Operated by model BP59-00048 original remote control. With discrete codes for on, off, and all inputs except HDMI and video 2. Programmed by learning from an OFA with the new HLP codes. If 'On' doesn't turn your television on consistently (e.g. in your System On macro), I have found that repeating the 'On' code for the HLP, separated by several 'On' codes for other devices, works. You could also separate the two HLP 'On' codes with an appropriate delay.
Designed for:
URC Home Theater Master MX-700
|
|
Samsung LN-S4140D Television
Added by Mahim Ranjan | 2007 | 2,066 views
• Operated by model BN59-00511A original remote control. Includes discrete input commands.
Designed for:
URC Home Theater Master MX-700
|
|
Samsung HLR-5667 Television
Added by DaveP | 2006 | 2,027 views
• Operated by model BP59-00071 original remote control. A complete setup including discrete inputs, power and picture modes. Also includes commands not on the original remote, such as picture mode, sleep and SRS.
Designed for:
URC Home Theater Master MX-700
|
|
Samsung HLP-5063W Television
Added by Steve Griffin | 2005 | 1,999 views
• Operated by model BP59-00048C original remote control. A complete set of codes for this device.
Designed for:
URC Home Theater Master MX-700
|
|
Samsung TX-P2670WH Television
Added by Anthony Ouellette | 2005 | 1,986 views
A complete setup for this device.
Designed for:
URC Home Theater Master MX-700
|
|
|
Search Remote Central's Files
Also available: our special Device Browser gathers all component configuration files into a single place, regardless of the remote control model they were intended for.
Share with the remote control community
by uploading a file to Remote Central!
| 
