Decodes all learned infrared codes in a CCF file and gives you information on the protocol, device number, command number, and so on. Requires the DecodeIR.DLL file, available here.

For 32/64 bit Windows, Linux and Mac. DecodeIR is used to decode learned IR signals, and is required by DecodeCCF and IR Tool Modified.

IR Tool originally written by Glenn Clapp and modified by Dan Arnold to work with John Fine's DecodeIR.DLL. A dialog box pops up with Protocol, Device, OBC and EFC. Once that box is closed the original program code will decode the same hex command, however given that DecodeIR is much more current than IR Tool, any information that conflicts with the popup dialog box should be ignored.

For proper operation this requires the latest DecodeIR.DLL file, available here, to be in the same directory.