Here is my setup for the MX-1000. Many of the buttons were "borrowed" from this forum. My goal was to make it simple. I did not use a main1 page. I just modified the main, added some channel macros, and lighting control. Then took out everything else.

I started by stripping everything out of the default model that I could, and tried to use a small number of buttons to conserve resource space. That way I could have room to upgrade when the Designer software gets a little better.

My system consists of 5 basic devices. The most-used buttons are large, placed for easy access with the right thumb, and are uniquely shaped so that they can be identified without the need for reading glasses. I didn't try to duplicate all the buttons of each device remote, but selected only those that my family uses. All equipment is turned on/off together by a single pair of buttons located on Page 1 of each device. Includes .BMP files.

From the "less is more" philosophy... I tried not to clutter the remote with pages full of seldom used functions (except for DVD, page 2). The hard Power button is a macro in each device that turns all power off, so no matter what the state, it works.

My system is setup for 6 Devices and makes use of discrete codes learned from a Pronto (sorry no translator...). This uses a combination of preprogrammed codes and learned commands. Some original buttons included, but relies heavily on Daniel's buttons.

This is my simple, yet functional layout file for the Home Theater Master MX-1000. Many of the buttons have been "borrowed" from Daniel's Configuration with a few custom ones. In most cases, I used the "PREV CH" hard button on the remote as a "Pause" (for the ReplayTV, DVD, and CD, and MP3 players). I found this was much more useful as a hard button.

I set up my system for 6 devices. It's a much simpler button layout, but I used Daniel Tonks' buttons that are available here (thus you'll also need to download and install the button.ini and BTN files from his configuration). Every Command has been learned, and I have included the .LDT file.

This is my conceptual prototype for an MX-1000 layout with a sea motif. Your buttons are fish, crabs, lobsters, shells, and black pearls (plus a "water surface" button.) No functions are attached to the buttons, since I don't actually own an MX-1000. Includes .BTN and .BMP files plus the button.ini file. See the readme.txt file for installation instructions. I've set up the interface for two devices. In older MDL format.