This layout is an evolution of my TSU3000 layout. It is activity-based and makes heavy use of macros to control my two zones of equipment and home automation. The layout of hard and soft buttons for each device follows a pattern, making it fairly simple to learn to use. There is a help screen for each device. The skin is based on a pattern that matches the paint of our living room.

The result of my design: 134 custom-made buttons (not counting spacers & labels)! My favorite button is the volume toggle in the lower right page. Here's what's unique about my configuration:

Consistent frame-based GUI with three button groups in frame:
TOP: device selection with trinary button states - pressing a pressed button in the main page of a device executes a setup macro with auto-power-on, etc.
LEFT: device specific buttons, e.g. TiVo: Favorites, Thumbs Up/Down, Slo-Mo
BOTTOM: “orthogonal” (e.g. X-10 & Amplifier are always needed independent media devices), or common functions (Keypad)

Modifier buttons, when pressed once, lead to an extra screen – when pressed again they lead back to same device

Eye pleasing “soft” design with fairly correct lighting (shadows, etc.) and well balanced colors

Simplicity – one page operation with most common functions

No confusing clutter (I put in time, date & battery for completeness only... I actually prefer it without those items, but it's easier to erase them than to integrate them later)

The activity signal is still visible, though barely taking up any space now

Background is defined on the System page only,... (more)

This layout is an evolution of my TSU3000 layout. It is activity-based and makes heavy use of macros to control my two zones of equipment and home automation. The layout of hard and soft buttons for each device follows a pattern, making it fairly simple to learn to use. It also contains a fairly extensive help system. This look is the result of my wife asking me to do a layout that matched her favorite purse!

This remote features for the user:

Inviting splash screen introduces the location of the remote, the designer, and features inviting background art.

Color-coded functionality, allowing easy discernment between video and audio functions. The user may simply glance at the remote to find where they are.

Directions are provided on pages that may need instructions to continue use.

Subdued background art demonstrates the selected function without overpowering displayed buttons.

Latching source buttons that glow to let the user know exactly where they are.

Pages are titled to further assist the user in navigating through the remote.

Sides of the touchscreen and hard buttons are reserved for consistent mode buttons. The center of the remote is the active use area.

Maximum icons are used to minimize required reading. Text is provided only when icons will not suffice to explain the button’s function.

Well-placed and sized buttons allow a wider variety of finger sizes to use it.

Button placements are consistent, regardless of the function, source, or mode selected, allowing less required reading for the user during normal use.

Always-available... (more)

I have developed a very clean, simple and neat Activity-based configuration, which is also fully functional. It features simple custom graphics and custom-labeled buttons. In addition, it includes my first attempt to develop a transport graphic which was derived from a digital photograph, from one of my OEM remotes. My configuration features 100% .png graphics which all utilize a transparent background, for that custom look. My .pcf features 10 devices on 42 pages. The Yamaha device contains some 30 + discrete codes.

My approach to developing the user interface for my ProntoPro NG was focused on practicality and function. The PPNG's utility, in my opinion, comes from its many hard buttons--allowing a user to issue commands without looking down at the remote. My design therefore tries to use the hard buttons for the most common operations: arrow navigation, chapter advance, home page, the "TiVo" button, and so on.

I believe the most practical user interface for an entertainment system is one that focuses on activities rather than devices. The design I've implemented hides the devices that are merely providing "output" (namely the receiver and the television). The activities are roughly analogous to "input" devices (DVD player, DirecTivo, GameCube, and music). However, the user interfaces for these activities are often sparse--limited to only those remote control features I have ever utilized while engaged in an activity. If I'm playing GameCube, I only care about controlling inputs, adjusting the volume, and switching the television aspect.

Where possible, I have tried to keep buttons that provide a given function across multiple activities in roughly the same place. For example, a "Go"... (more)

RUNNER UP! This PCF is a modified version of the one I use on my remote. It has continued to change and be enhanced almost every day for two months! Most of the buttons have been redone several times to look right on the actual remote. Things you might miss a first glance are:

Buttons that blend into the background (on the side and top bars).

Shadows on some buttons and text. On the actual remote the home page buttons actually seem to float above the background.

In the “Power Center”, rocker switches that seem to work when pressed.

All buttons have a “pressed” state.

“Filmstrip” Dish Network TV icons on the favorite pages

“Visual” independent lighting control for the Home Theatre.

Password protection lockout sample on the home page; click on the padlock.

Animated countdown timers runs in macros, giving user feedback to wait.

Magnifying glass on help page.

A tools “mini remote” page for the basic TV and AV receiver functions from most devices.

Cursor buttons on the screen as well as the hard buttons. My wife likes the soft buttons and I like the hard buttons. One remote does it both ways!

Full... (more)

A complete system layout with the following devices.

This is a bad first effort, but I wanted to quickly develop a theme for the TSU7000. So let's call it the Picasso remote (although there is separate artwork for each device, from Picasso, Da Vinci, & Dali). I'm in love with the look of the equipment and the logos. Strange marriage of art and consumer electronics. Each equipment or logo on the Home Pages jumps to the device. Firm1 through Firm4 are devoted to daisy-chained DVD/CD changers with controlling hub.

A sample PCF file from Philips with three sample cursor control interfaces.