Really a must-have utility that converts RC5 to long hex. It also fixes bad long hex with the built in validation tool. Got a code that doesn't work, or works intermitantly? Just paste it into the utility and hit validatate, most of the time it will fix the code for you, so you can copy the repaired code out of the utility and paste it back into whatever programing application you are using.

v5.0 Makes clean IR sequences from IR protocol files. See the readme file for more information.

GUI for John Fine's MakeHex. Unzip to the same folder as MakeHex and run from there. There is no install, but it requires .net framework to run (most Windows OS's have this already). It mainly just saves you the effort of sifting through IRP files and copying/editing them.

It requires stricter formatting than MakeHex which means Device, Function and Define (5 max) must be together. Otherwise edit manually in this GUI.

IR Tool originally written by Glenn Clapp and modified by Dan Arnold to work with John Fine's DecodeIR.DLL. A dialog box pops up with Protocol, Device, OBC and EFC. Once that box is closed the original program code will decode the same hex command, however given that DecodeIR is much more current than IR Tool, any information that conflicts with the popup dialog box should be ignored.

For proper operation this requires the latest DecodeIR.DLL file, available here, to be in the same directory.

Program to generate Pronto Hex Codes from the Kaseikyo and Sharp binary codes provided by Denon.

For 32/64 bit Windows, Linux and Mac. DecodeIR is used to decode learned IR signals, and is required by DecodeCCF and IR Tool Modified.

Decodes all learned infrared codes in a CCF file and gives you information on the protocol, device number, command number, and so on. Requires the DecodeIR.DLL file, available here.

Excel-based IR Hex code generator for use with the Pronto, as provided by Bose for the V30 system.

v1.0.0.9 New version for 2009. Convert AMX .IRL - Crestron .IR - Aurora Multimedia .WIR - Pronto .HTML.

IRTool v1.3 is the original IRTool by Glenn Clapp and modified to also encode/decode Xantech IR-X10 IR commands. The entire Xantech IR-X10 command set can be decoded and encoded by this version of the tool.