All commands from the original remote.

All commands for this receiver.

Learned I/R codes. Button layout designed for use with activity-based setups. Should also work for the AVR-630.

A complete setup for this device including discrete power.

Page 2 contains surround modes that could not be learned directly (I had to use an intermediate remote).

Elementary functions including the DVD-Button, which had to be inserted via NEOHacker (learning impossible).

A complete setup for this receiver. Includes a second NCF file with Zone II controls.

Basic functions of the OEM remote have been learned manually.

A simple CCF containing a complete set of codes.

Full layout (lacking SPL and M1-4 buttons). It may not look pretty, but it gets the job done!

This files was tested 90% by me and should get you going in your setup. I returned the DPR-1001, so this is my final post.

Includes discrete codes for on, off, all surrond modes, 6ch input and for each device input. Four panels total.

Just a simple 2 panel layout for AVR8000. Mainly designed for aliasing to.

All codes from the original remote.

This is a basic CCF for the Harmon-Kardon AVR7000 DD/DTS receiver. It has all buttons from the "main" remote. As far as I know, there are no additional discrete codes (such as selecting a specific surround mode).

Includes all original functions.

Contains all codes from all buttons mapped to small buttons with which you can do what you want.