The following page was printed from remotecentral.com:
|
Runco Projector Configurations
| |
|
In this section: Browse our entire collection of device-specific configuration files, gathered from all of our file areas.
Runco Projectors - Device Configurations Displaying 17 entries.
| 1. | Commands for this device are available as part of a system layout file. |
|
| 2. | A complete configuration for this device. |
|
| 3. | A complete configuration for this device. |
|
| 4. | A complete device setup from Runco with all controls. |
|
| 5. | Complete Runco discrete command set. |
|
| 6. | A complete device setup from Runco with all controls. |
|
| 7. | A complete configuration for this device. |
|
| 8. | Commands for this device are available as part of a system layout file. |
|
| 9. | Commands for this device are available as part of a system layout file. |
|
| 10. | A complete configuration for this device. |
|
| 11. | A complete configuration for this device. |
|
| 12. | A complete configuration for this device. |
|
| 13. | A complete configuration for this device. |
|
| 14. | A complete configuration for this device. |
|
| 15. | A complete device setup from Runco with all controls. |
|
| 16. | All keys off original factory supplied remote. Page 3 is a description of the inputs on the controller. FYI The HD1 and HD2 inputs are 5 BNC, the Component input is RCA and accepts only 480i, there are 2 S-video's, 1 Composite (RCA), and 2 DVI inputs. There is a DVI output and a 5 BNC output (format unknown). |
|
| 17. | A complete configuration for this device. |
|
Share with the remote control community
by uploading a file to Remote Central!
| 
