Your Universal Remote Control Center
RemoteCentral.com
Remote Central's File Area
Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 
 
In this section: Browse our entire collection of device-specific configuration files, gathered from all of our file areas.

Previous Level
Anthem Receivers - Device Configurations
Displaying 4 entries.
Anthem D2 Receiver
Added by mopgcw | 2011 | 2,188 views
A complete configuration for this device.
Designed for:
Philips Pronto TSU2000 & RU940
Anthem MRX-300, 500 & 700 Receivers
Added by mwasserm | 2012 | 4,834 views
Complete IR Library for Anthem MRX 300/500/700 Receivers.
Designed for:
All RTI Family Models
Anthem MRX-300, MRX-500 & MRX-700 Receivers
Added by Smeeon | 2013 | 3,457 views
Anthem MRX Series Discrete IR Library for models MRX-300 MRX-500 and MRX-700. These were captured from the original remote and verified clean with no repeating or sloppy captures. This controls both Main Zone and Zone 2.
Designed for:
All RTI Family Models
Anthem MRX300, MRX500 & MRX700 Receivers
Added in 2011 | 4,941 views
There are three files provided. One is the .mxf file with two versions of devices for the Anthem MRX series of AVRs. V1 is called M700A and v2 is M700B. M700B is the full layout of the main AMRX700 remote and includes several Zone 2 controls. M700A is a slightly scaled back version. All codes were learned into the remote and
tested. The .mxf file has both M700A and M700B devices set to RF on Line 2. You may want to reset these to ALL if you use this file as your basis for programming the remote.
Designed for:
URC Complete Control MX-850


Share with the remote control community
by uploading a file to Remote Central!
Hosting Services by ipHouse