• Operated by model RM-F04 original remote control.
A simple device configuration for Humax FOXSAT Freeview+ receivers, with handset RM-F04 set to command set 2.
Instructions to enable two Humax receivers FOXSAT HDR and Freeview+ HDR to be used at same location without conflict:
To use more then one of the same box with different remotes you will need to change the remote codeset.
To do this please make sure only ONE of the units is on, and the TV is on the correct channel to view the Humax.
With the unit you want to control on and in front of you, hold down the “0” and the “OK” button for approximately 6 Seconds. This Applies To RM-F01, RM-F04 and RM-108 Remotes.
A message will appear on the Television screen, “You can change the remote control mode”.
With this message press a number 1 - 6 to select a different frequency mode. Note: Default Mode is 1.
It will then confirm on the screen which mode you have switched to. This remote will now only work with units set to that code number.
