All the controls from the original remote, plus discrete codes. Seperated into three files: one for the tuner, one for receiver functions, and one with individual signal outputs (useful for switching multi-zone and record outputs). (RC-904)

Mostly learned commands. Discrete commands to change function.

Complete set of codes with expanded tuner commands. For the AVR-2802 as well.

IR codes for buttoms captured from the original remote. Descrete on/off added. (RC-916)

This file closely matches the 4 pages of buttons on the Denon Aktis RC-8000 remote control and 3 pages for the Denon tuner. Includes MXF and MXD versions.

This device file was built from the HTM preprogrammed one, which is limited and contains commands not applicable to the AVR-3300 as well as commands of little use. This file contains a number of learned codes, so you may wish to hide a couple of the pages if you are concerned about users resetting various parameters.

A file containing all commands. (RC-904)

Captured codes for this receiver. (RC-860)

A CCF file containing the complete library of IR codes for this & the AVR-1803, hand converted and tested.

All codes from the original remote control.

Originally

Discrete surround mode codes plus 2 discrete volume levels.

Complete set of CLEAN codes including discretes. Most codes are one-time, but are repeat where necessary.

A simple CCF for this receiver. (RC-883)

Remote learned codes for all 3 zones. (RC-969)

Complete codes for this receiver.

Button-for-button remapping of the Aktis remote control. (Aktis RC-8000)

A complete file with all three zones learned. (RC-969)

A complete file for this device.

13 discrete codes for the AVR-3300's tuner section. Codes A - E and 1 - 8. (RC-860)

I left out many of the original buttons as I didn't need them, but it should get you started with customizing your own one. (RC-921)

All remote control codes for this device.

My take on the Denon AVR-5700.